From ILMS-Wiki

(Difference between revisions)

Latest revision as of 08:15, 5 December 2011

JAMSSCS

JAMSSCS is a program for the calculation of design discharges for small homogeneous catchment areas. For this purpose, JAMSSCS implements the unit-hydrograph method of the U.S. Soil Conservation Service (SCS) together with the Curve Number (CN) method for the effective rainfall. The program enables the estimation of the runoff in consideration of an approach of a specific design depth of precipitation for small homogeneous catchment areas. The calculations are carried out as far as possible according to the German DVWK rules 112/1982 and 113/1984 and have been adjusted and changed at some points.

JAMSSCS uses the Jena Adapatable Modelling System (JAMS) and is completely written in JAVA. Therefore, it is usable independently from the operating system on different computer configurations.

Note: The decimal separator is the . (period) and not the , (comma) for the data input.

Installation and Quick Start

Figure 1: JAMSSCS main window

The installation in MS-Windows is carried out via the execution of the installation file "JAMSSCS_setup.exe". This file contains all necessary files for the execution. Additionally, a sample dataset is contained which can be used for a test and as template for the generation of new datasets. This manual uses this dataset. The installation file copies the necessary files and registers JAMSSCS in the start menu. A desktop icon can also be generated.

To tart JAMSSCS, double click on "JAMSSCS.exe". Hereupon, the main window of JAMSSCS appears (JAMS-launcher). The main window contains three tabulators (main group, Kostra-precipitation, individual event), which offer different functions. For the execution of the test dataset only the working directory needs to be set up. The complete path to the JAMSSCS installation directory has to be given here.

With the button [RUN] the model is started.

Figure 2: runtime window of JAMSSCS

A new window with three tabulators appears. The first one [JAMSProgress] represents general information on the current model run as text. Should an error or problem arise while executing, an error message might appear in this view. The second tabulator [design discharge] shows the hydrograph of the design discharge in m³/s. The third tabulator [design volume] shows the cumulated volume in million m³. You can zoom into the graphics by left mouse click and pushing of the window. By right mouse click into the graphic a menu opens which allows a certain adjustment, e.g. changing the diagram title, labeling of the axes, background color, frame color, etc. Furthermore, the diagram can be saved as PNG graphic via this menu. The hydrograph can be switched on or off with the help of the checkbox on the right side.

JAMSSCS Input Data

Information that is provided for JAMSSCS always follows a strict format. For tables it is defined as follows:

Rows that are introduced by # are comment rows which are not processed by the program. Comment rows are only allowed at the beginning of the table. There is no limitation of their number.
The tabulator is always the column separator
The order of the columns must always follow the order in the sample tables.
The first row which is not introduced by # has to contain the row labeling. This labeling should always correspond to the labeling of the tables x and y. The program differentiates between upper and lower case.
The following rows contain the actual information (separated by the tabulator).

JAMSSCS needs information about the research area and at least the design depth of precipitation. Additionally, a KOSTRA-precipitation file can be read in which contains precipitation heights for different durations and return periods. This file can be read out in XML-format from the KOSTRA-DWD software and can then be processed directly in JAMSSCS.

The necessary area information consists of a description of the hydrological homogeneous areas (HRUs – Hydrological Response Units) that exist in the area given in tables (HRU-table). The output criterion for the generation is the land use and soil type. The calculation of the desired CN-value is carried out on the basis of the reference table (CN table). In the installation there are examples given for both tables which can be adjusted, changed or added. Newly generated input tables for the area description can be given in the main window.

CN Table

The JAMSSCS CN table contains "Curve-Numbers" for different land use-soil-combinations and can be found in the installation directory as “cnNumbers.par”. The Curve-Number describes the part of precipitation that is runoff-effective. It can be interpreted as relative part. The actual calculation of the effective rainfall is described further down with the help of the curve-number.

Table 1: Die CN table of JAMSSCS

#CN-Numbers
LID	soil use	A	B	C	D
1	settlement (neatly built)	80	80	80	80
2	settlement (loosely built)	38	73	89	98
3	farmland	64	76	84	88
5	deciduous forest	36	60	73	79
6	coniferous forest	25	55	70	77
7	bush, scattered fruit	45	66	77	83
9	grassland	30	58	71	78
10	open areas	80	80	80	80
11	water areas	100	100	100	100

After the comment in the first row, the table contains the column labeling which do not need to be formulated exactly as it is shown here but can also be labeled differently. Note: The order of the columns must be kept in this order. The columns contain:

LID: A numeric key number for a land cover or land use type, e.g. 3 for farmland (column 1).
Soil use: A description of the referring land cover or land use type in text form (column 2).
A, B, C, D: SCS soil types that are described further down (columns 3, 4, 5, and 6).

Then, the entries for the single land cover categories in LID form, description, Curve Number for soil type A, B, C and D follow in the rows. The table can be expanded user-defined via entering new datasets if required. At this, the soil types are defined as follows:

A: Soils with high infiltration capacity also after heavy pre-moistening, e.g. deep sand or gravel soils.
B: Soils with middle infiltration capacity. Deep to moderate deep soils with moderate fine or rough texture, e.g. middle deep sand soils, loess, sandy clay.
C: Soils with low infiltration capacity. Soils with fine to moderate fine texture or water damming layer, e.g. flat sand soils, sandy clay.
D: Soils with very low infiltration capacity. Clay soils, very flat soils above nearly impermeable material, soils with always high groundwater level.

HRU table

The HRU table contains information about the research area and is structured as follows: (see table 2)

Table 2: HRU table with area information

#hrus.par
"ID"	"AREA"	"LID"	"SID"
1	0.011	3	B
2	1.39	4	B
3	0.156	7	B
4	0.014	8	B
5	0.3	11	B

The first row without introducing comment symbol (#) contains the labeling for the intern given variables.

The JAMSSCS-component, which this table reads, was generated in a way so exported GIS tables can be read in without further processing. For this reason the labeling must be given exactly as shown above. The permissible labeling are ID, SID, LID, AREA. The names do not need to be given in inverted commas. The order as well as upper and lower case are not important in this table. In addition to the tabulator, the comma (,) can be used as column separator, here.

The first column contains a clear numeric identification number for each hydrological unit; the second column contains the area (in m²), the third one contains the ID (LID) of the dominant land use of the table according to table 1. The fourth column contains the dominant soil type (A-D) – also according to table 1. For the processing of other areas the HRU table always needs to be generated. This can be carried out directly from a GIS. (Tools for automatized derivation in ArcView are described below.)

Further Input Data

Figure 3: The different precipitation allocations of JAMSSCS

Figure 4: Sum functions of the different precipitation allocations of JAMSSCS

The other necessary input data is given directly in the JAMSSCS main window (Figure 1). It is:

Receiving stream length: The maximum length of the main receiving stream from the source to the runoff in kilometers.
Deepest, highest point: The topographic height in meters of the deepest point (runoff) and of the highest point (source) of the main receiving stream.
N-allocation form: Determines the temporal allocation of precipitation. Valid information is: B = block rainfall, rainfall M = in the middle of the event, A = at the beginning of the event and E = at the end of the event .
Model runtime: Calculation time for the modeling in hours.
Time step length: Length of a specific calculation time step in seconds.

For the precipitation allocation form the referring temporal allocations are implemented in JAMSSCS and follow the DVWK 113/1984 as far as possible.

Calculation of Individual Events

Individual precipitation events can be simulated with the help of the tabulator individual events. The necessary parameters can be adjusted here. These are:

Precipitation duration: the temporal duration of precipitation in minutes
Design depth of precipitation: the amount of fallen precipitation in open land which is reduced to effective rainfall in the model run
Individual-Q-output: file name for an output file that is to be generated in which the calculated values can be saved. It is a simple ASCII-file which can be further processed with text editors as well as table calculations. The file name has to be given in consideration to the working directory. The file contains the runoff in m³/s for each time step as well as the temporally cumulated runoff volume in million m³.
Decimal places: the number of decimal places for the values in the output file.
Runoff-plot: the graphic output of hydrographs can be switched on or off here

The following fields serve the configuration of the model output. These are:

Legend: labeling of the legend which is additionally complemented automatically by the precipitation height
Line color: labeling for the color of the hydrograph. Valid labeling are for example "blue", "red", "green", "black" etc.
X,Y-axes labeling: axes labeling (can also be changed later)
Volume-plot: generates a graphic presentation of the temporally cumulated runoff volume in million m³.

Calculation with KOSTRA-Precipitation

Figure 5: Input tabulator for KOSTRA simulations with variable durations and return periods as well as extreme precipitation (PEN)

Figure 6: KOSTRA simulation with fixed duration and variable return period

Abb. 7: Figure 7: KOSTRA simulation with variable duration and fixed return period

The product KOSTRA-DWD contains the storm rainfall heights for Germany in dependence of the duration and return period in the area of the durations D between 5 minutes and 72 hours as well as in the area of the yearly return periods between T = 0.5 a (according to the yearly exceedence frequency of n = 2x per year in the mean) and T = 100 a (in the mean all 100 years only once received or exceeded according to n = 0.01).

KOSTRA-DWD allows the export as XML-file which can be read directly from JAMSSCS. Such a file contains all values of a KOSTRA-DWD grid cell.

The calculations are carried out with the precipitation allocation form given in the tabulator main group. Further necessary settings are provided in the tabulator KOSTRA precipitation in JAMSSCS. These are:

Kostra on: Switches KOSTRA calculations on or off

Kostra-runoff-plot: Switches the graphic output of the hydrograph for KOSTRA calculations on or off

Kostra-volume-plot: Switches the graphic output of the cumulated volume for KOSTRA calculations on or off

Kostra-input-file: the exported XML-file from KOSTRA-DWD. The complete path name has to be given here, e.g. E:\Projekte\JAMSscnMethod\KOSTRA-DWD-Tabelle-S48-Z56 Jena.xml.

Return period: either one of the valid KOSTRA return periods (0.5, 1, 2, 5, 10, 20, 50, 100) or each other return period which must be bigger than 100 years, though. The referring precipitations are calculated according to the PEN-method in this case. If a return period of more than 100 years is chosen in the field, the checkbox “PEN-precipitation on:” must be selected.

Kostra-detail: a file name for the detail text output of a KOSTRA simulation. The file name is completed intern via the working directory. This file contains runoff data for each time step and for each combination of a KOSTRA simulation. The output format is a text file separated by tabulator.

Kostra-summary: a compressed form of the results of a KOSTRA simulation which contains the maximum peak discharge and the volume of each calculated KOSTRA simulation

Decimal places: the number of decimal places for the values in the output file

Variable precipitation return period: If the checkbox is activated, the calculation with the precipitation duration, given in the tabulator individual event, and all return periods shown above is carried out. The valid precipitation durations are: 5, 10, 15, 20, 30, 45, 60, 90, 120, 180, 240, 360, 540, 720, 1080, 1440, 2880, 4320 minutes.

Variable precipitation duration: If the checkbox is activated (and the one above is deactivated), the calculation for the return period given above and all precipitation durations given above is carried out.

PEN-precipitation on: with the help of this checkbox the calculation of precipitation with very high return periods, which go beyond the 100 years return interval of the KOSTRA-values, is switched on or off. (The calculation of the PEN-precipitations is described further down.)

PEN return periods: a list of return periods for which the PEN-calculation shall be carried out. The values of the list have to be separated by semicolon (;).

Intern Calculations - SCS Theory, PEN-Precipitations

The intern calculation of the unit hydrograph is based on the calculation of the effective rainfall in dependence of the CN-value of the catchment area and linear reservoirs in series (Nash-cascade) with two storages with different discharge coefficients (k_1,2) as well as the variable allocation of the precipitation to the two storages. The first storage represents the fast direct runoff; the second represents the decelerated basis runoff.

CN-Value Calculation

An area-weighted mean CN-value, based on the entries of the HRU table and the CN table, is calculated for the area. The calculation is carried out according to the following equation:

$CN = \sum_{HRU=1}^{n}rel.Area_{HRU} \cdot CN(LU,ST)_{HRU}$

rel.Area is the relative area part of the HRU and CN(LU, ST) is the entry referring to the HRU in the CN table.

The Effective Rainfall

The effective rainfall (h_Ne) describes the runoff-effective amount of the total precipitation. The calculation is carried out according to the following exponential function:

$h_{Ne} = \frac{\left[ (h_N / 25.4) - (200/CN) + 2 \right]^2}{(h_N / 25.4) + (800 / CN) - 8} \cdot 25.4$

h_N is the design depth of precipitation (in mm) and CN is the CN-value according to equation 1. The minimal level for the design depth of precipitation (UG_N) where an effective rainfall > 0 occurs results when h_Ne is set to zero:

$UG_N = \left(\frac{200}{CN} - 2 \right) \cdot 25.4$

For a design depth of precipitation less than or equal to the minimal level (UG_N) an effective rainfall of 0 mm results, thus.

Allocation of the Effective Rainfall

The effective rainfall which is calculated according to the presented equations above is allocated to the two storages of the storage cascade based on the calculation of the coefficients $β 1,2$ . $β 1$ is calculated on the basis of receiving stream length (L) and the receiving stream difference (I_g = (HP – TP) / L) according to:

$\beta_1 = 1 - 0.02425 \cdot \left(\ln\left(\frac{L}{\sqrt{I_g}}\right)\right)^{3.2444}$ for $\frac{L}{\sqrt{I_g}}\le10$

$\beta_1 = \frac{3.91}{\left(\frac{L}{\sqrt{I_g}}\right)^{0.86}} + 0.1$ for $\frac{L}{\sqrt{I_g}} > 10$

The coefficient $β 2$ results from 1 – $β 1$ . Due to this allocation the first storage (direct runoff part) of the cascade gets relatively more precipitation in steep areas and less in flat areas.

Linear Reservoirs in Series

The calculation of the unit hydrograph is carried out via linear reservoirs in series with two storages that have different retention coefficients (k_1,2). These are calculated according to:

$k_1 = \frac{0.555}{\left(\frac{L}{\sqrt{I_g}}\right)^{0.61}} + 0.511 \cdot \ln\left(\frac{L}{\sqrt{I_g}}\right) - 0.355$

$k_2 = 3 \cdot k_1^{1.3}$

For each of the two storages a unit hydrograph based on the k-values is then calculated according to the following equation:

$u(t) = \frac{A_E}{3.6} \cdot \frac{1}{k \cdot (n-1)!} \cdot \left(\frac{t}{k}\right)^{n-1} \cdot e^{-\frac{t}{k}}$

with:

t	time step in seconds
A_E	size of the catchment area in km²
n	number of storages(in this case: always 2)
k	the retention coefficient according to the equations given above

The total runoff of the area results from the sum of both runoff components, then.

Practice-Oriented Extreme Values of the Precipitation (PEN)

The estimation of precipitation with return periods or return intervals which are less frequent than the 100 years of the KOSTRA-data is carried out according to the modified PEN-method (Gewässerkundlicher Landesdienst Thüringen: Anforderungen an Hydrologische Gutachten, Fassung vom 31. Mai 2005). With this method precipitations for arbitrary rare return intervals based on the KOSTRA-data for each KOSTRA-duration are extrapolated.

The calculations for a precipitation P with a return interval T and an arbitrary duration is carried out according to:

$P(T) = P_{k1} + \left(\frac{P_{k100} \cdot 1.2 - P_{k1} \cdot 0.9}{\ln 100} \cdot \ln (T)\right)$ ,

$P k 1$ of the KOSTRA-precipitation with return interval is 1 year and Pk100 of the KOSTRA-precipitation with return interval is 100 years of the referring duration.

HRU Parameter Definition in ArcView

The parameter table can be generated with the GIS ArcView quite simply. The necessary data and steps are described in the following part.

Necessary Data Areas

For the processing the following data areas must be available:

Soil map with CN-coding (A-D) – available for the entire land Thuringia (The input map has to contain a field with the name “SID” in which the CN-coding (A-D) is saved!)
Land use with referring coding – available for the entire land Thuringia (The input map has to contain a field with the name “LID” in which the clear numeric coding for the land use units is saved!)
Shape file of the catchment area
Shape file of the main receiving stream (optional)
digital terrain model (optional)

All data areas must be available in a consistent reference system (e.g. Gauss-Krüger).

Conditions in ArcView

Figure 8: Selection of the "Geoprocessing" extension

The following extensions must be installed and activated:

Geoprocessing
Spatial Analyst (only required when elevation model is used)
JAMSSCS extension (jamsscs.avx)

The extension jamsscs.avx (downloadable under the link above) must be copied into ArcView’s extension directory (EXT32). This can generally be found under: C:\ESRI\AV_GIS30\ARCVIEW\EXT32.

The installation of the JAMSSCS extension adds a new menu (JAMSSCS) in ArcView which is visible when a View is active. This menu contains three entries that are described in more detail further down. Whether the extensions are installed and activated can be checked under the menu item file --> check extensions.

Clipping of Input Data

Figure 9: Dialogue for clipping input data

The soil map with CN-coding and the land use map for the relevant catchment area have to be cut in order to generate area information. This is carried out with "GeoProcessingWizard", the three input maps (soil map, land use map, catchment area borders) which must be open in ArcView. The following steps describe the procedure:

Start "GeoProcessingWizard" in the menu JAMSSCS --> GeoProcessing...
Select the subitem "Clip" in the appearing dialogue and confirm with the button [Next]
Select the soil map or land use map in the upper ListBox ("select input theme that shall be clipped:") and the catchment area border in the second ListBox ("select Polygon overlay theme:"). For both the checkbox "only use selected objects" must be deselected.
Optionally, an output file name can be given in the third ListBox ("give output file").
The process is started with the button [Finish].

When the steps described above are carried out for both input maps, cut versions of the land use and soil map are available for further processing, then.

Overlaying Input Data

Figure 10: Dialogue for the overlay of input data

The cut maps of the land use and the CN-coded soil map have to be available for the overlay. The overlay is then carried out with "GeoProcessingWizard" which is started with the menu item JAMSSCS --> GeoProcessing... . Then, the following information has to be given.

Select "Intersect themes" then click [Next]
Select the cut land use in the first ListBox
Select the cut CN-coded soil map in the second ListBox
Optionally, a file name for the output file (e.g. "hrus.shp") can be given.

The process is started with the button [Finish]. A map is developed which contains the combination of land use and CN-coded soil types as result.

Figure 11: Input information, overlay and attribute table

Refreshing the Attribute Table

For the use in JAMSSCS the attribute table of the generated HRU-theme must be refreshed and extended. This is carried out as follows:

Adding a clear numeric ID for each polygon
Deleting surplus attributes
Calculation and adding of the area in m² for each polygon

For this purpose, the HRU-theme has to be selected in the view at first. Then, the attribute table is extended with the necessary information via the menu item "JAMSSCS --> refresh table...".

Exporting the Attribute Table

The extended attribute table must be exported finally in order to be processed with JAMMSCS at a later point. For this purpose, the HRU-theme in the view must be active. The export is then carried out with the menu item "JAMSSCS-->export table...". The program asks for a file name and starts the export, then.

Bibliography

DVWK-Regeln zur Wasserwirtschaft, H. 112/1982: Arbeitsanleitung zur Anwendung von Niederschlags-Abfluss-Modellen in kleinen Einzugsgebieten; verantw. Herausg. Dt. Verb. für Wasserwirtschaft u. Kulturbau e.V. (DVWK). Bearb. vom DVWK-Fachausschuss "Niederschlag-Abfluss-Modelle" - Hamburg, Berlin: Parey; Teil I: Analyse; DK 556.161.072 Niederschlag-Abfluss-Modelle, DK 556.51.028 Kleineinzugsgebiete. - 1982.

DVWK-Regeln zur Wasserwirtschaft, H. 113/1984: Arbeitsanleitung zur Anwendung von Niederschlags-Abfluss-Modellen in kleinen Einzugsgebieten; verantw. Herausg. Dt. Verb. für Wasserwirtschaft u. Kulturbau e.V. (DVWK). Bearb. vom DVWK-Fachausschuss "Niederschlag-Abfluss-Modelle" - Hamburg, Berlin: Parey; Teil 2: Synthese; DK 556.161.072 Niederschlag-Abfluss-Modelle, DK 556.51.028 Kleineinzugsgebiete. - 1984.

Editing and Contact

Dr. Peter Krause	Dr. Claudia Liese
Lehrstuhl Geoinformatik	Referat 51 - Gewässerökologie, Hydrologie, Wasserbau
Institut für Geographie	Abteilung 5 - Wasser, Boden, Altlasten, Wismut
Friedrich-Schiller-Universität Jena	Thüringer Landesanstalt für Umwelt und Geologie
Tel. 03641-948864	Tel. 03641-684518
email: p.krause@uni-jena.de	email: c.liese@tlugjena.thueringen.de

@@ Line 1: / Line 1: @@
+[[de:JAMSSCS]]
 =JAMSSCS=
@@ Line 12: / Line 13: @@
-[[Bild:jamsSCS.jpg|thumb|Figure 1: JAMSSCS main window]] The installation in MS-Windows is carried out via the execution of the installation file "JAMSSCS_setup.exe". This file contains all necessary files for the execution. Additionally, a sample dataset is contained which can be used for a test and as template for the generation of new datasets. This manual uses this dataset. The installation file copies the necessary files and registers JAMSSCS in the start menu. A desktop icon can also be generated.
+[[File:jamsSCS.jpg|thumb|Figure 1: JAMSSCS main window]] The installation in MS-Windows is carried out via the execution of the installation file "JAMSSCS_setup.exe". This file contains all necessary files for the execution. Additionally, a sample dataset is contained which can be used for a test and as template for the generation of new datasets. This manual uses this dataset. The installation file copies the necessary files and registers JAMSSCS in the start menu. A desktop icon can also be generated.
 To tart JAMSSCS, double click on "JAMSSCS.exe". Hereupon, the main window of JAMSSCS appears (JAMS-launcher). The main window contains three tabulators (main group, Kostra-precipitation, individual event), which offer different functions. For the execution of the test dataset only the working directory needs to be set up. The complete path to the JAMSSCS installation directory has to be given here.
-With the button '''[RUN]''' the model is started. [[Bild:jamsSCSrun.jpg|thumb|Figure 2: runtime window of JAMSSCS]]
+With the button '''[RUN]''' the model is started. [[File:jamsSCSrun.jpg|thumb|Figure 2: runtime window of JAMSSCS]]
 A new window with three tabulators appears. The first one [JAMSProgress] represents general information on the current model run as text. Should an error or problem arise while executing, an error message might appear in this view. The second tabulator [design discharge] shows the hydrograph of the design discharge in m³/s. The third tabulator [design volume] shows the cumulated volume in million m³. You can zoom into the graphics by left mouse click and pushing of the window. By right mouse click into the graphic a menu opens which allows a certain adjustment, e.g. changing the diagram title, labeling of the axes, background color, frame color, etc. Furthermore, the diagram can be saved as PNG graphic via this menu. The hydrograph can be switched on or off with the help of the checkbox on the right side.
@@ Line 32: / Line 33: @@
 The necessary area information consists of a description of the hydrological homogeneous areas (HRUs – Hydrological Response Units) that exist in the area given in tables (HRU-table). The output criterion for the generation is the land use and soil type. The calculation of the desired CN-value is carried out on the basis of the reference table (CN table). In the installation there are examples given for both tables which can be adjusted, changed or added. Newly generated input tables for the area description can be given in the main window.
 ==CN Table==
@@ Line 38: / Line 38: @@
-Tabelle 1: Die CN table of JAMSSCS
+Table 1: Die CN table of JAMSSCS
 {| class="wikitable" <hiddentext>generated with [[:de:Wikipedia:Helferlein/VBA-Macro for EXCEL tableconversion]] V1.7<\hiddentext>
 |- style="font-size:10pt"  valign="bottom"
@@ Line 53: / Line 53: @@
 |- style="font-size:10pt"
 | height="16"  valign="bottom" | 1
-|  valign="bottom" | settlement (neatly builded)
+|  valign="bottom" | settlement (neatly built)
 | align="center" valign="bottom" | 80
 | align="center" valign="bottom" | 80
@@ Line 61: / Line 61: @@
 |- style="font-size:10pt"
 | height="16"  valign="bottom" | 2
-|  valign="bottom" | settlement (loosely builded)
+|  valign="bottom" | settlement (loosely built)
 | align="center" valign="bottom" | 38
 | align="center" valign="bottom" | 73
@@ Line 128: / Line 128: @@
 * '''LID:''' A numeric key number for a land cover or land use type, e.g. 3 for farmland (column 1).
-* '''soil use:''' A description of the referring land cover or land use type in text form (column 2).
+* '''Soil use:''' A description of the referring land cover or land use type in text form (column 2).
 * ''' A, B, C, D: ''' SCS soil types that are described further down (columns 3, 4, 5, and 6).
 Then, the entries for the single land cover categories in LID form, description, Curve Number for soil type A, B, C and D follow in the rows. The table can be expanded user-defined via entering new datasets if required.
@@ Line 136: / Line 136: @@
 * '''B:''' Soils with middle infiltration capacity. Deep to moderate deep soils with moderate fine or rough texture, e.g. middle deep sand soils, loess, sandy clay.
 * '''C:''' Soils with low infiltration capacity. Soils with fine to moderate fine texture or water damming layer, e.g. flat sand soils, sandy clay.
 * '''D:''' Soils with very low infiltration capacity. Clay soils, very flat soils above nearly impermeable material, soils with always high groundwater level.
 ==HRU table==
@@ Line 190: / Line 190: @@
 The first column contains a clear numeric identification number for each hydrological unit; the second column contains the area ('''in m²'''), the third one contains the ID (LID) of the dominant land use of the table according to table 1. The fourth column contains the dominant soil type (A-D) – also according to table 1. For the processing of other areas the HRU table always needs to be generated. This can be carried out directly from a GIS. (Tools for automatized derivation in ArcView are described below.)
 ==Further Input Data==
-[[Bild:N-Verteilung_dis.jpg|thumb|Figure 3: The different precipitation allocations of JAMSSCS]][[Bild:N-Verteilung_cum.jpg|thumb|Figure 4: Sum functions of the different precipitation allocations of JAMSSCS]]
+[[File:N-Verteilung_dis.jpg|thumb|Figure 3: The different precipitation allocations of JAMSSCS]][[File:N-Verteilung_cum.jpg|thumb|Figure 4: Sum functions of the different precipitation allocations of JAMSSCS]]
 The other necessary input data is given directly in the JAMSSCS main window (Figure 1). It is:
 * '''Receiving stream length:''' The maximum length of the main receiving stream from the source to the runoff in kilometers.
@@ Line 219: / Line 218: @@
 =Calculation with KOSTRA-Precipitation=
-[[Bild:jamsKostra.jpg|thumb|Figure 5: Input tabulator for KOSTRA simulations with variable durations and return periods as well as extreme precipitation (PEN)]]
+[[File:jamsKostra.jpg|thumb|Figure 5: Input tabulator for KOSTRA simulations with variable durations and return periods as well as extreme precipitation (PEN)]]
-[[Bild:varAnnuality.jpg|thumb|Figure 6: KOSTRA simulation with fixed duration and variable return period]]
+[[File:varAnnuality.jpg|thumb|Figure 6: KOSTRA simulation with fixed duration and variable return period]]
-[[Bild:varDuration.jpg|thumb|Abb. 7: Figure 7: KOSTRA simulation with variable duration and fixed return period]]
+[[File:varDuration.jpg|thumb|Abb. 7: Figure 7: KOSTRA simulation with variable duration and fixed return period]]
 The product KOSTRA-DWD contains the storm rainfall heights for Germany in dependence of the duration and return period in the area of the durations D between 5 minutes and 72 hours as well as in the area of the yearly return periods between T = 0.5 a (according to the yearly exceedence frequency of n = 2x per year in the mean) and T = 100 a (in the mean all 100 years only once received or exceeded according to n = 0.01).
 KOSTRA-DWD allows the export as XML-file which can be read directly from JAMSSCS. Such a file contains all values of a KOSTRA-DWD grid cell.
 The calculations are carried out with the precipitation allocation form given in the tabulator main group. Further necessary settings are provided in the tabulator KOSTRA precipitation in JAMSSCS. These are:
@@ Line 290: / Line 287: @@
 ==Linear Reservoirs in Series==
-The calculation of the unit hydrograph is carried out via linear reservoirs in series with two storages that have different retention coefficients (k<sub>1,2</sub>). These are calculated according to:D
+The calculation of the unit hydrograph is carried out via linear reservoirs in series with two storages that have different retention coefficients (k<sub>1,2</sub>). These are calculated according to:
 <math>k_1 = \frac{0.555}{\left(\frac{L}{\sqrt{I_g}}\right)^{0.61}} + 0.511 \cdot \ln\left(\frac{L}{\sqrt{I_g}}\right) - 0.355</math>
@@ Line 313: / Line 310: @@
 |}
 The total runoff of the area results from the sum of both runoff components, then.
 ==Practice-Oriented Extreme Values of the Precipitation (PEN)==
@@ Line 333: / Line 330: @@
 * Soil map with CN-coding (A-D) – available for the entire land Thuringia (The input map has to contain a field with the name “SID” in which the CN-coding (A-D) is saved!)
 * Land use with referring coding – available for the entire land Thuringia (The input map has to contain a field with the name “LID” in which the clear numeric coding for the land use units is saved!)
-* Shapefile of the catchment area
+* Shape file of the catchment area
-* Shapefile of the main receiving stream (optional)
+* Shape file of the main receiving stream (optional)
 * digital terrain model (optional)
 All data areas must be available in a consistent reference system (e.g. Gauss-Krüger).
 ==Conditions in ArcView==
-[[Bild:extensions.jpg|thumb|Figure 8: Selection of the "Geoprocessing" extension]]The following extensions must be installed and activated:
+[[File:extensions.jpg|thumb|Figure 8: Selection of the "Geoprocessing" extension]]The following extensions must be installed and activated:
 * Geoprocessing
-* Spatial Analyst (only requiered when elevation model is used)
+* Spatial Analyst (only required when elevation model is used)
-* JAMSSCS extension([http://www.geoinf.uni-jena.de/tlugwiki/uploads/b/b3/Jamsscs.avx jamsscs.avx])
+* JAMSSCS extension ([http://www.geoinf.uni-jena.de/tlugwiki/uploads/b/b3/Jamsscs.avx jamsscs.avx])
 The extension jamsscs.avx (downloadable under the link above) must be copied into ArcView’s extension directory (EXT32). This can generally be found under: C:\ESRI\AV_GIS30\ARCVIEW\EXT32.
 The installation of the JAMSSCS extension adds a new menu (JAMSSCS) in ArcView which is visible when a View is active. This menu contains three entries that are described in more detail further down.
 Whether the extensions are installed and activated can be checked under the menu item file --> check extensions.
 ==Clipping of Input Data==
-[[Bild:Clip.jpg|thumb|Figure 9: Dialogue for clipping input data]]The soil map with CN-coding and the land use map for the relevant catchment area have to be cut in order to generate area information. This is carried out with "GeoProcessingWizard", the three input maps (soil map, land use map, catchment area borders) which must be open in ArcView. The following steps describe the procedure:
+[[File:Clip.jpg|thumb|Figure 9: Dialogue for clipping input data]]The soil map with CN-coding and the land use map for the relevant catchment area have to be cut in order to generate area information. This is carried out with "GeoProcessingWizard", the three input maps (soil map, land use map, catchment area borders) which must be open in ArcView. The following steps describe the procedure:
 * Start "GeoProcessingWizard" in the menu JAMSSCS --> GeoProcessing...
@@ Line 367: / Line 360: @@
 ==Overlaying Input Data==
-[[Bild:Overlay.jpg|thumb|Figure 10: Dialogue for the overlay of input data]] The cut maps of the land use and the CN-coded soil map have to be available for the overlay. The overlay is then carried out with "GeoProcessingWizard" which is started with the menu item JAMSSCS --> GeoProcessing... . Then, the following information has to be given.
+[[File:Overlay.jpg|thumb|Figure 10: Dialogue for the overlay of input data]] The cut maps of the land use and the CN-coded soil map have to be available for the overlay. The overlay is then carried out with "GeoProcessingWizard" which is started with the menu item JAMSSCS --> GeoProcessing... . Then, the following information has to be given.
 * Select "Intersect themes" then click '''[Next]'''
 * Select the cut land use in the first ListBox
@@ Line 373: / Line 366: @@
 * Optionally, a file name for the output file (e.g. "hrus.shp") can be given.
-The process is started with the button '''[Finish]'''. A map is developed which contains the combination of land use and CN-coded soil types as result.[[Bild:Overlay_img.jpg|thumb|Figure 11: Input information, overlay and attribute table]]
+The process is started with the button '''[Finish]'''. A map is developed which contains the combination of land use and CN-coded soil types as result.[[File:Overlay_img.jpg|thumb|Figure 11: Input information, overlay and attribute table]]
 ==Refreshing the Attribute Table==

JAMSSCS

Latest revision as of 08:15, 5 December 2011

Contents

JAMSSCS

Installation and Quick Start

JAMSSCS Input Data

CN Table

HRU table

Further Input Data

Calculation of Individual Events

Calculation with KOSTRA-Precipitation

Intern Calculations - SCS Theory, PEN-Precipitations

CN-Value Calculation

The Effective Rainfall

Allocation of the Effective Rainfall

Linear Reservoirs in Series

Practice-Oriented Extreme Values of the Precipitation (PEN)

HRU Parameter Definition in ArcView

Necessary Data Areas

Conditions in ArcView

Clipping of Input Data

Overlaying Input Data

Refreshing the Attribute Table

Exporting the Attribute Table

Bibliography

Editing and Contact

Views

Personal tools

Navigation

Search

Toolbox

In other languages